Note the worn out condition of the valley on the left of this picture.

Deteriorating roof condition. Leaking equipment is damaging roofing material

Leaking rooftop equipment accelerating the deterioration of the roof.

Two layers of extra tough polyester reinforcing this air conditioning curb.

Installation of polyester and emulsion. This is an odorless process.

The whole roof is reinforced - no spot is left uncovered.

After the roof is prepared, two layers of polyester and emulsion are applied.

Laying down emulsion and rolling out polyester rolls.

Smooth, seamless and reflective. The roof is now tougher than when it was when it was originally installed

These units are sealed and watertight.

Satellite dish on the existing roof

A modified bitumen pad is installed underneath the satellite dish.  Extra care was taken to get the dish lined up properly.

The finished roof with the pad and roof reinforcement blended together for a smooth, seamless finish.

After a thick waterproofing layer of chopped fiberglass and emulsion has dried, a reflective aluminum coating finishes the application

The finished roof is clean, seamless and protected from UV rays.

A roof like this can last between 10 and 15 years.

With a yearly maintenence program, and recoating the roof on a 10-12 year basis this roof will last practically forever.